| Dust Collection Method | Polyurethane Gel Sheets |
| Applied Voltage | AC 6.0kV (p-p) |
| Input Voltage / Current Consumption |
DC 24V ±5%, 700mA |
| Power Consumption |
17 W |
| Applied Fluid |
0.1 MPa to 0.3MPa (use clean air) |
| Air Supply Hose Diameter | 6mm x 4mm |
| Ionizer Blowing Modes |
Continuous High-Frequency Pulse: Cycle Length: 100msec, Pulse Width: 40msec Low-Frequency Pulse: Cycle Length: 250msec, Pulse Width: 100msec |
| Off-Timer Settings | 1, 2, 5, 10, 30 seconds (set by DIP switch) |
| Ozone Generation |
Less than 0.05ppm (measured 50mm from device) |
| Operating Temperature and Humidity |
5°C to 40°C, 35% to 65% RH (non-condensing) |
| Noise | 86.5 db (A) (o.3 MPa, Continuous mode, 1m distance in front position) |
| Weight | 6.0kg |
| Accessories | Power Supply Transformer: Input: 100 to 240VAC , Output: 24VDC Mounting Bracket for N-2 Ionizer Electrode needle Replacement Screwdriver |
